Independent redesign proposal by Chia-Han Chen

Internal redesign proposal CM-20261122-A: not the official CHYAU MAW website

Products

Compare the 18 standard types by photo, drawing, material list and size; plus custom bases, parts and steel.

18 standard mold base types

Two-plate: 6 types

Runner and gate lie on the parting line and eject with the part; the simplest, easiest and lowest-cost design. A, B, C, AC, BB, BC.

Three-plate: 6 types

Part and runner come out at two parting lines, with support pins (tie rods). D types have a runner stripper plate, E types do not.

Simplified three-plate: 6 types

F types include a runner stripper plate, G types do not; on both, guide pins are installed downward from the top clamp plate.

Size codes are in centimetres: e.g. 15x15 = 150 mm wide × 150 mm long; 18x18 = 180 × 180 mm (as explained on the original resources page). Common standards in the trade include Futaba, DME, HASCO and each maker’s own; the types and sizes below are CHYAU MAW’s own.

A

Two-plate (cold runner)

Plates
7
Sizes
54
Series
15 to 50

The standard two-plate (cold-runner) construction. A support plate behind the core plate on the moving side reinforces it, so the moving-side plate does not bend or deform under injection pressure. This protects mold accuracy and service life and makes core inserts easier to fix and machine, which is why many mold makers order this type.

Type A mold base
Original photo, also used for AC.
Type A structure drawing
Structure drawing from the original site. Original A page

Material list

Type A material list
No.PartChinese nameMaterialQty
1Top clamp plate上固定板S50C1
2Cavity plate (fixed side, A plate)母(固定側)板S50C1
3Core plate (moving side, B plate)公(可動側)板S50C1
4Support plate封(承)板S50C1
5Spacer block隔(墊腳)板S50C2
6Ejector retainer plate上頂出板S50C1
7Ejector plate下頂出板S50C1
8Bottom clamp plate下固定板S50C1
9Guide pin導梢SCM214
10Guide bushing導套SUJ24
11Return pin回位梢SCM214
12Socket head cap screw (bottom plate)內六角螺絲(下板)SCM4154
13Socket head cap screw (top plate)內六角螺絲(上板)SCM4154
14Socket head cap screw (ejector plate)內六角螺絲(頂出板)SCM4154

Series and sizes offered

Rows are series (plate width, cm), columns are lengths (cm); only filled cells are offered. Click a cell to pick it.

Type A sizes
Series \ length15182023252830354045506070
1515×1515×1815×2015×2315×2515×3015×35
1818×1818×2018×2318×25
2020×2020×2320×2520×2820×3020×3520×4020×45
2323×2323×2523×30
2525×2525×2825×3025×3525×4025×4525×50
2828×2828×30
3030×3030×3530×4030×4530×5030×60
3535×3535×4035×4535×5035×60
4040×4040×4540×5040×6040×70
4545×4545×5045×6045×70
5050×5050×6050×70

Plate footprint, to scale in 500 × 700 mm

Pick a size to draw it

Diagram, 50 mm grid; thickness quoted on request.

B

Two-plate (cold runner)

Plates
8
Sizes
54
Series
15 to 50

A two-plate construction with more variation: Type A plus a stripper plate on the face of the core plate, for quick and easy ejection of the molded part. It keeps the moving-side plate from deforming when the ejector pins push, protecting the cosmetic quality of the part.

Type B mold base
Original photo, also used for BB.
Type B structure drawing
Structure drawing from the original site. Original B page

Material list

Type B material list
No.PartChinese nameMaterialQty
1Top clamp plate上固定板S50C1
2Cavity plate (fixed side, A plate)母(固定側)板S50C1
3Stripper plate中環板S50C1
4Core plate (moving side, B plate)公(可動側)板S50C1
5Support plate封(承)板S50C1
6Spacer block隔(墊腳)板S50C2
7Ejector retainer plate上頂出板S50C1
8Ejector plate下頂出板S50C1
9Bottom clamp plate下固定板S50C1
10Guide pin導梢SCM214
11Guide bushing導套SUJ24
12Bushing襯套SUJ24
13Return pin回位梢SCM214
14Socket head cap screw (bottom plate)內六角螺絲(下板)SCM4154
15Socket head cap screw (top plate)內六角螺絲(上板)SCM4154
16Socket head cap screw (ejector plate)內六角螺絲(頂出板)SCM4154
17Socket head cap screw (stripper plate)內六角螺絲(中環板)SCM4154

Series and sizes offered

Rows are series (plate width, cm), columns are lengths (cm); only filled cells are offered. Click a cell to pick it.

Type B sizes
Series \ length15182023252830354045506070
1515×1515×1815×2015×2315×2515×3015×35
1818×1818×2018×2318×25
2020×2020×2320×2520×2820×3020×3520×4020×45
2323×2323×2523×30
2525×2525×2825×3025×3525×4025×4525×50
2828×2828×30
3030×3030×3530×4030×4530×5030×60
3535×3535×4035×4535×5035×60
4040×4040×4540×5040×6040×70
4545×4545×5045×6045×70
5050×5050×6050×70

Plate footprint, to scale in 500 × 700 mm

Pick a size to draw it

Diagram, 50 mm grid; thickness quoted on request.

C

Two-plate (cold runner)

Plates
6
Sizes
54
Series
15 to 50

The simplest two-plate construction and the easiest to build; the cavity is usually machined directly into the plates. Mold makers either pocket the plate for inserts of another steel or change the plate material itself. This is the type most mold shops use most often.

Type C mold base
Original product photo.
Type C structure drawing
Structure drawing from the original site. Original C page

Material list

Type C material list
No.PartChinese nameMaterialQty
1Top clamp plate上固定板S50C1
2Cavity plate (fixed side, A plate)母(固定側)板S50C1
3Core plate (moving side, B plate)公(可動側)板S50C1
4Spacer block隔(墊腳)板S50C2
5Ejector retainer plate上頂出板S50C1
6Ejector plate下頂出板S50C1
7Bottom clamp plate下固定板S50C1
8Guide pin導梢SCM214
9Guide bushing導套SUJ24
10Return pin回位梢SCM214
11Socket head cap screw (bottom plate)內六角螺絲(下板)SCM4154
12Socket head cap screw (top plate)內六角螺絲(上板)SCM4154
13Socket head cap screw (ejector plate)內六角螺絲(頂出板)SCM4154

Series and sizes offered

Rows are series (plate width, cm), columns are lengths (cm); only filled cells are offered. Click a cell to pick it.

Type C sizes
Series \ length15182023252830354045506070
1515×1515×1815×2015×2315×2515×3015×35
1818×1818×2018×2318×25
2020×2020×2320×2520×2820×3020×3520×4020×45
2323×2323×2523×30
2525×2525×2825×3025×3525×4025×4525×50
2828×2828×30
3030×3030×3530×4030×4530×5030×60
3535×3535×4035×4535×5035×60
4040×4040×4540×5040×6040×70
4545×4545×5045×6045×70
5050×5050×6050×70

Plate footprint, to scale in 500 × 700 mm

Pick a size to draw it

Diagram, 50 mm grid; thickness quoted on request.

AC

Two-plate (cold runner)

Plates
7
Sizes
54
Series
15 to 50

Differs from Type A in that the guide pins are mounted from the support plate, helping locate the moving-side plates and making accurate machining easier.

Type A mold base
Photo of Type A, shared on the original site; the drawing shows how AC differs.
Type AC structure drawing
Structure drawing from the original site. Original AC page

Material list

Type AC material list
No.PartChinese nameMaterialQty
1Top clamp plate上固定板S50C1
2Cavity plate (fixed side, A plate)母(固定側)板S50C1
3Core plate (moving side, B plate)公(可動側)板S50C1
4Support plate封(承)板S50C1
5Spacer block隔(墊腳)板S50C2
6Ejector retainer plate上頂出板S50C1
7Ejector plate下頂出板S50C1
8Bottom clamp plate下固定板S50C1
9Guide pin導梢SCM214
10Guide bushing導套SUJ24
11Return pin回位梢SCM214
12Socket head cap screw (bottom plate)內六角螺絲(下板)SCM4154
13Socket head cap screw (top plate)內六角螺絲(上板)SCM4154
14Socket head cap screw (ejector plate)內六角螺絲(頂出板)SCM4154

Series and sizes offered

Rows are series (plate width, cm), columns are lengths (cm); only filled cells are offered. Click a cell to pick it.

Type AC sizes
Series \ length15182023252830354045506070
1515×1515×1815×2015×2315×2515×3015×35
1818×1818×2018×2318×25
2020×2020×2320×2520×2820×3020×3520×4020×45
2323×2323×2523×30
2525×2525×2825×3025×3525×4025×4525×50
2828×2828×30
3030×3030×3530×4030×4530×5030×60
3535×3535×4035×4535×5035×60
4040×4040×4540×5040×6040×70
4545×4545×5045×6045×70
5050×5050×6050×70

Plate footprint, to scale in 500 × 700 mm

Pick a size to draw it

Diagram, 50 mm grid; thickness quoted on request.

BB

Two-plate (cold runner)

Plates
8
Sizes
54
Series
15 to 50

Differs from Type B in that the guide pins are mounted from the support plate, helping locate the moving-side plates and making accurate machining easier.

Type B mold base
Photo of Type B, shared on the original site; the drawing shows how BB differs.
Type BB structure drawing
Structure drawing from the original site. Original BB page

Material list

Type BB material list
No.PartChinese nameMaterialQty
1Top clamp plate上固定板S50C1
2Cavity plate (fixed side, A plate)母(固定側)板S50C1
3Stripper plate中環板S50C1
4Core plate (moving side, B plate)公(可動側)板S50C1
5Support plate封(承)板S50C1
6Spacer block隔(墊腳)板S50C2
7Ejector retainer plate上頂出板S50C1
8Ejector plate下頂出板S50C1
9Bottom clamp plate下固定板S50C1
10Guide pin導梢SCM214
11Guide bushing導套SUJ24
12Bushing襯套SUJ24
13Return pin回位梢SCM214
14Socket head cap screw (bottom plate)內六角螺絲(下板)SCM4154
15Socket head cap screw (top plate)內六角螺絲(上板)SCM4154
16Socket head cap screw (ejector plate)內六角螺絲(頂出板)SCM4154
17Socket head cap screw (stripper plate)內六角螺絲(中環板)SCM4154

Series and sizes offered

Rows are series (plate width, cm), columns are lengths (cm); only filled cells are offered. Click a cell to pick it.

Type BB sizes
Series \ length15182023252830354045506070
1515×1515×1815×2015×2315×2515×3015×35
1818×1818×2018×2318×25
2020×2020×2320×2520×2820×3020×3520×4020×45
2323×2323×2523×30
2525×2525×2825×3025×3525×4025×4525×50
2828×2828×30
3030×3030×3530×4030×4530×5030×60
3535×3535×4035×4535×5035×60
4040×4040×4540×5040×6040×70
4545×4545×5045×6045×70
5050×5050×6050×70

Plate footprint, to scale in 500 × 700 mm

Pick a size to draw it

Diagram, 50 mm grid; thickness quoted on request.

BC

Two-plate (cold runner)

Plates
7
Sizes
54
Series
15 to 50

Differs from Type B in that the support plate is omitted.

Type BC mold base
Original product photo.
Type BC structure drawing
Structure drawing from the original site. Original BC page

Material list

Type BC material list
No.PartChinese nameMaterialQty
1Top clamp plate上固定板S50C1
2Cavity plate (fixed side, A plate)母(固定側)板S50C1
3Stripper plate中環板S50C1
4Core plate (moving side, B plate)公(可動側)板S50C1
5Spacer block隔(墊腳)板S50C2
6Ejector retainer plate上頂出板S50C1
7Ejector plate下頂出板S50C1
8Bottom clamp plate下固定板S50C1
9Guide pin導梢SCM214
10Guide bushing導套SUJ24
11Bushing襯套SUJ24
12Return pin回位梢SCM214
13Socket head cap screw (bottom plate)內六角螺絲(下板)SCM4154
14Socket head cap screw (top plate)內六角螺絲(上板)SCM4154
15Socket head cap screw (ejector plate)內六角螺絲(頂出板)SCM4154
16Socket head cap screw (stripper plate)內六角螺絲(中環板)SCM4154

Series and sizes offered

Rows are series (plate width, cm), columns are lengths (cm); only filled cells are offered. Click a cell to pick it.

Type BC sizes
Series \ length15182023252830354045506070
1515×1515×1815×2015×2315×2515×3015×35
1818×1818×2018×2318×25
2020×2020×2320×2520×2820×3020×3520×4020×45
2323×2323×2523×30
2525×2525×2825×3025×3525×4025×4525×50
2828×2828×30
3030×3030×3530×4030×4530×5030×60
3535×3535×4035×4535×5035×60
4040×4040×4540×5040×6040×70
4545×4545×5045×6045×70
5050×5050×6050×70

Plate footprint, to scale in 500 × 700 mm

Pick a size to draw it

Diagram, 50 mm grid; thickness quoted on request.

DA

Three-plate (pin-point gate)

Plates
8
Sizes
52
Series
15 to 50

Structurally similar to two-plate Type A, but with three-plate (pin-point gate) feeding and ejection, so the molded part and the runner separate automatically at two different parting lines. A runner stripper plate is added behind the cavity plate.

Type DA mold base
Original photo, also used for FA, FAC.
Type DA structure drawing
Structure drawing from the original site. Original DA page

Material list

Type DA material list
No.PartChinese nameMaterialQty
1Top clamp plate上固定板S50C1
2Runner stripper plate小點板S50C1
3Cavity plate (fixed side, A plate)母(固定側)板S50C1
4Core plate (moving side, B plate)公(可動側)板S50C1
5Support plate封(承)板S50C1
6Spacer block隔(墊腳)板S50C2
7Ejector retainer plate上頂出板S50C1
8Ejector plate下頂出板S50C1
9Bottom clamp plate下固定板S50C1
10Guide pin導梢SCM214
11Guide bushing (cavity side)導套(母模)SUJ24
12Support pin (tie rod)拉桿SCM214
13Support-pin bushing (runner stripper plate)拉桿小點板襯套SUJ24
14Support-pin guide bushing (cavity plate)拉桿母模導套SUJ24
15Return pin回位梢SCM214
16Socket head cap screw (bottom plate)內六角螺絲(下板)SCM4154
17Socket head cap screw (ejector plate)內六角螺絲(頂出板)SCM4154
18Socket head cap screw (support pin)內六角螺絲(拉桿)SCM4154

Series and sizes offered

Rows are series (plate width, cm), columns are lengths (cm); only filled cells are offered. Click a cell to pick it.

Type DA sizes
Series \ length182023252830354045506070
1515×1815×2015×2315×2515×3015×35
1818×2018×2318×25
2020×2020×2320×2520×2820×3020×3520×4020×45
2323×2323×2523×30
2525×2525×2825×3025×3525×4025×4525×50
2828×2828×30
3030×3030×3530×4030×4530×5030×60
3535×3535×4035×4535×5035×60
4040×4040×4540×5040×6040×70
4545×4545×5045×6045×70
5050×5050×6050×70

Plate footprint, to scale in 500 × 700 mm

Pick a size to draw it

Diagram, 50 mm grid; thickness quoted on request.

DB

Three-plate (pin-point gate)

Plates
9
Sizes
52
Series
15 to 50

Structurally similar to two-plate Type B, with three-plate (pin-point gate) feeding and ejection: part and runner separate automatically at two parting lines. A runner stripper plate is added behind the cavity plate.

Type DB mold base
Original product photo.
Type DB structure drawing
Structure drawing from the original site. Original DB page

Material list

Type DB material list
No.PartChinese nameMaterialQty
1Top clamp plate上固定板S50C1
2Runner stripper plate小點板S50C1
3Cavity plate (fixed side, A plate)母(固定側)板S50C1
4Stripper plate中環板S50C1
5Core plate (moving side, B plate)公(可動側)板S50C1
6Support plate封(承)板S50C1
7Spacer block隔(墊腳)板S50C2
8Ejector retainer plate上頂出板S50C1
9Ejector plate下頂出板S50C1
10Bottom clamp plate下固定板S50C1
11Guide pin導梢SCM214
12Guide bushing (cavity side)導套(母模)SUJ24
13Bushing (stripper plate)襯套(中環板)SUJ24
14Support pin (tie rod)拉桿SCM214
15Support-pin bushing (runner stripper plate)拉桿小點板襯套SUJ24
16Support-pin guide bushing (cavity plate)拉桿母模導套SUJ24
17Return pin回位梢SCM214
18Socket head cap screw (bottom plate)內六角螺絲(下板)SCM4154
19Socket head cap screw (ejector plate)內六角螺絲(頂出板)SCM4154
20Socket head cap screw (stripper plate)內六角螺絲(中環板)SCM4154
21Socket head cap screw (support pin)內六角螺絲(拉桿)SCM4154

Series and sizes offered

Rows are series (plate width, cm), columns are lengths (cm); only filled cells are offered. Click a cell to pick it.

Type DB sizes
Series \ length182023252830354045506070
1515×1815×2015×2315×2515×3015×35
1818×2018×2318×25
2020×2020×2320×2520×2820×3020×3520×4020×45
2323×2323×2523×30
2525×2525×2825×3025×3525×4025×4525×50
2828×2828×30
3030×3030×3530×4030×4530×5030×60
3535×3535×4035×4535×5035×60
4040×4040×4540×5040×6040×70
4545×4545×5045×6045×70
5050×5050×6050×70

Plate footprint, to scale in 500 × 700 mm

Pick a size to draw it

Diagram, 50 mm grid; thickness quoted on request.

DC

Three-plate (pin-point gate)

Plates
7
Sizes
52
Series
15 to 50

Structurally similar to two-plate Type C, with three-plate (pin-point gate) feeding and ejection: part and runner separate automatically at two parting lines. A runner stripper plate is added behind the cavity plate.

Type DC mold base
Original photo, also used for FC.
Type DC structure drawing
Structure drawing from the original site. Original DC page

Material list

Type DC material list
No.PartChinese nameMaterialQty
1Top clamp plate上固定板S50C1
2Runner stripper plate小點板S50C1
3Cavity plate (fixed side, A plate)母(固定側)板S50C1
4Core plate (moving side, B plate)公(可動側)板S50C1
5Spacer block隔(墊腳)板S50C2
6Ejector retainer plate上頂出板S50C1
7Ejector plate下頂出板S50C1
8Bottom clamp plate下固定板S50C1
9Guide pin導梢SCM214
10Guide bushing (cavity side)導套(母模)SUJ24
11Support pin (tie rod)拉桿SCM214
12Support-pin bushing (runner stripper plate)拉桿小點板襯套SUJ24
13Support-pin guide bushing (cavity plate)拉桿母模導套SUJ24
14Return pin回位梢SCM214
15Socket head cap screw (bottom plate)內六角螺絲(下板)SCM4154
16Socket head cap screw (ejector plate)內六角螺絲(頂出板)SCM4154
17Socket head cap screw (support pin)內六角螺絲(拉桿)SCM4154

Series and sizes offered

Rows are series (plate width, cm), columns are lengths (cm); only filled cells are offered. Click a cell to pick it.

Type DC sizes
Series \ length182023252830354045506070
1515×1815×2015×2315×2515×3015×35
1818×2018×2318×25
2020×2020×2320×2520×2820×3020×3520×4020×45
2323×2323×2523×30
2525×2525×2825×3025×3525×4025×4525×50
2828×2828×30
3030×3030×3530×4030×4530×5030×60
3535×3535×4035×4535×5035×60
4040×4040×4540×5040×6040×70
4545×4545×5045×6045×70
5050×5050×6050×70

Plate footprint, to scale in 500 × 700 mm

Pick a size to draw it

Diagram, 50 mm grid; thickness quoted on request.

EA

Three-plate (pin-point gate)

Plates
7
Sizes
52
Series
15 to 50

Structurally similar to two-plate Type A, with three-plate feeding so part and runner come out at two different parting lines. Compared with Type DA, there is no runner stripper plate behind the cavity plate.

Type EA mold base
Original photo, also used for GA, GAC.
Type EA structure drawing
Structure drawing from the original site. Original EA page

Material list

Type EA material list
No.PartChinese nameMaterialQty
1Top clamp plate上固定板S50C1
2Cavity plate (fixed side, A plate)母(固定側)板S50C1
3Core plate (moving side, B plate)公(可動側)板S50C1
4Support plate封(承)板S50C1
5Spacer block隔(墊腳)板S50C2
6Ejector retainer plate上頂出板S50C1
7Ejector plate下頂出板S50C1
8Bottom clamp plate下固定板S50C1
9Guide pin導梢SCM214
10Guide bushing (cavity side)導套(母模)SUJ24
11Support pin (tie rod)拉桿SCM214
12Support-pin guide bushing (cavity plate)拉桿母模導套SUJ24
13Return pin回位梢SCM214
14Socket head cap screw (bottom plate)內六角螺絲(下板)SCM4154
15Socket head cap screw (ejector plate)內六角螺絲(頂出板)SCM4154
16Socket head cap screw (support pin)內六角螺絲(拉桿)SCM4154

Series and sizes offered

Rows are series (plate width, cm), columns are lengths (cm); only filled cells are offered. Click a cell to pick it.

Type EA sizes
Series \ length182023252830354045506070
1515×1815×2015×2315×2515×3015×35
1818×2018×2318×25
2020×2020×2320×2520×2820×3020×3520×4020×45
2323×2323×2523×30
2525×2525×2825×3025×3525×4025×4525×50
2828×2828×30
3030×3030×3530×4030×4530×5030×60
3535×3535×4035×4535×5035×60
4040×4040×4540×5040×6040×70
4545×4545×5045×6045×70
5050×5050×6050×70

Plate footprint, to scale in 500 × 700 mm

Pick a size to draw it

Diagram, 50 mm grid; thickness quoted on request.

EB

Three-plate (pin-point gate)

Plates
8
Sizes
52
Series
15 to 50

Structurally similar to two-plate Type B, with three-plate feeding so part and runner come out at two different parting lines. Compared with Type DB, there is no runner stripper plate behind the cavity plate.

Type EB mold base
Original product photo.
Type EB structure drawing
Structure drawing from the original site. Original EB page

Material list

Type EB material list
No.PartChinese nameMaterialQty
1Top clamp plate上固定板S50C1
2Cavity plate (fixed side, A plate)母(固定側)板S50C1
3Stripper plate中環板S50C1
4Core plate (moving side, B plate)公(可動側)板S50C1
5Support plate封(承)板S50C1
6Spacer block隔(墊腳)板S50C2
7Ejector retainer plate上頂出板S50C1
8Ejector plate下頂出板S50C1
9Bottom clamp plate下固定板S50C1
10Guide pin導梢SCM214
11Guide bushing (cavity side)導套(母模)SUJ24
12Bushing (stripper plate)襯套(中環板)SUJ24
13Support pin (tie rod)拉桿SCM214
14Support-pin guide bushing (cavity plate)拉桿母模導套SUJ24
15Return pin回位梢SCM214
16Socket head cap screw (bottom plate)內六角螺絲(下板)SCM4154
17Socket head cap screw (ejector plate)內六角螺絲(頂出板)SCM4154
18Socket head cap screw (stripper plate)內六角螺絲(中環板)SCM4154
19Socket head cap screw (support pin)內六角螺絲(拉桿)SCM4154

Series and sizes offered

Rows are series (plate width, cm), columns are lengths (cm); only filled cells are offered. Click a cell to pick it.

Type EB sizes
Series \ length182023252830354045506070
1515×1815×2015×2315×2515×3015×35
1818×2018×2318×25
2020×2020×2320×2520×2820×3020×3520×4020×45
2323×2323×2523×30
2525×2525×2825×3025×3525×4025×4525×50
2828×2828×30
3030×3030×3530×4030×4530×5030×60
3535×3535×4035×4535×5035×60
4040×4040×4540×5040×6040×70
4545×4545×5045×6045×70
5050×5050×6050×70

Plate footprint, to scale in 500 × 700 mm

Pick a size to draw it

Diagram, 50 mm grid; thickness quoted on request.

EC

Three-plate (pin-point gate)

Plates
6
Sizes
52
Series
15 to 50

Structurally similar to two-plate Type C, with three-plate feeding so part and runner come out at two different parting lines. Compared with Type DC, there is no runner stripper plate behind the cavity plate.

Type EC mold base
Original photo, also used for GC.
Type EC structure drawing
Structure drawing from the original site. Original EC page

Material list

Type EC material list
No.PartChinese nameMaterialQty
1Top clamp plate上固定板S50C1
2Cavity plate (fixed side, A plate)母(固定側)板S50C1
3Core plate (moving side, B plate)公(可動側)板S50C1
4Spacer block隔(墊腳)板S50C2
5Ejector retainer plate上頂出板S50C1
6Ejector plate下頂出板S50C1
7Bottom clamp plate下固定板S50C1
8Guide pin導梢SCM214
9Guide bushing (cavity side)導套(母模)SUJ24
10Support pin (tie rod)拉桿SCM214
11Support-pin guide bushing (cavity plate)拉桿母模導套SUJ24
12Return pin回位梢SCM214
13Socket head cap screw (bottom plate)內六角螺絲(下板)SCM4154
14Socket head cap screw (ejector plate)內六角螺絲(頂出板)SCM4154
15Socket head cap screw (support pin)內六角螺絲(拉桿)SCM4154

Series and sizes offered

Rows are series (plate width, cm), columns are lengths (cm); only filled cells are offered. Click a cell to pick it.

Type EC sizes
Series \ length182023252830354045506070
1515×1815×2015×2315×2515×3015×35
1818×2018×2318×25
2020×2020×2320×2520×2820×3020×3520×4020×45
2323×2323×2523×30
2525×2525×2825×3025×3525×4025×4525×50
2828×2828×30
3030×3030×3530×4030×4530×5030×60
3535×3535×4035×4535×5035×60
4040×4040×4540×5040×6040×70
4545×4545×5045×6045×70
5050×5050×6050×70

Plate footprint, to scale in 500 × 700 mm

Pick a size to draw it

Diagram, 50 mm grid; thickness quoted on request.

FA

Simplified three-plate

Plates
8
Sizes
41
Series
15 to 40

Similar in structure to three-plate Type DA, but the locating guide pins are installed downward from the top clamp plate and there are no guide pillars from the moving side: a simplified three-plate base.

Type DA mold base
Photo of Type DA, shared on the original site; the drawing shows how FA differs.
Type FA structure drawing
Structure drawing from the original site. Original FA page

Material list

Type FA material list
No.PartChinese nameMaterialQty
1Top clamp plate上固定板S50C1
2Runner stripper plate小點板S50C1
3Cavity plate (fixed side, A plate)母(固定側)板S50C1
4Core plate (moving side, B plate)公(可動側)板S50C1
5Support plate封(承)板S50C1
6Spacer block隔(墊腳)板S50C2
7Ejector retainer plate上頂出板S50C1
8Ejector plate下頂出板S50C1
9Bottom clamp plate下固定板S50C1
10Guide pin導梢SCM214
11Guide bushing (cavity side)導套(母模)SUJ24
12Guide bushing (core plate)導套(公板)SUJ24
13Runner-stripper-plate bushing小點板襯套SUJ24
14Return pin回位梢SCM214
15Socket head cap screw (bottom plate)內六角螺絲(下板)SCM4154
16Socket head cap screw (ejector plate)內六角螺絲(頂出板)SCM4154

Series and sizes offered

Rows are series (plate width, cm), columns are lengths (cm); only filled cells are offered. Click a cell to pick it.

Type FA sizes
Series \ length1820232528303540455060
1515×1815×2015×2315×2515×3015×35
1818×2018×2318×25
2020×2020×2320×2520×2820×3020×3520×4020×45
2323×2323×2523×30
2525×2525×2825×3025×3525×4025×4525×50
2828×2828×30
3030×3030×3530×4030×4530×5030×60
3535×3535×4035×4535×5035×60
4040×40

Plate footprint, to scale in 500 × 700 mm

Pick a size to draw it

Diagram, 50 mm grid; thickness quoted on request.

FC

Simplified three-plate

Plates
7
Sizes
41
Series
15 to 40

Similar in structure to three-plate Type DC, but the locating guide pins are installed downward from the top clamp plate and there are no guide pillars from the moving side: a simplified three-plate base.

Type DC mold base
Photo of Type DC, shared on the original site; the drawing shows how FC differs.
Type FC structure drawing
Structure drawing from the original site. Original FC page

Material list

Type FC material list
No.PartChinese nameMaterialQty
1Top clamp plate上固定板S50C1
2Runner stripper plate小點板S50C1
3Cavity plate (fixed side, A plate)母(固定側)板S50C1
4Core plate (moving side, B plate)公(可動側)板S50C1
5Spacer block隔(墊腳)板S50C2
6Ejector retainer plate上頂出板S50C1
7Ejector plate下頂出板S50C1
8Bottom clamp plate下固定板S50C1
9Guide pin導梢SCM214
10Guide bushing (cavity side)導套(母模)SUJ24
11Guide bushing (core plate)導套(公板)SUJ24
12Runner-stripper-plate bushing小點板襯套SUJ24
13Return pin回位梢SCM214
14Socket head cap screw (bottom plate)內六角螺絲(下板)SCM4154
15Socket head cap screw (ejector plate)內六角螺絲(頂出板)SCM4154

Series and sizes offered

Rows are series (plate width, cm), columns are lengths (cm); only filled cells are offered. Click a cell to pick it.

Type FC sizes
Series \ length1820232528303540455060
1515×1815×2015×2315×2515×3015×35
1818×2018×2318×25
2020×2020×2320×2520×2820×3020×3520×4020×45
2323×2323×2523×30
2525×2525×2825×3025×3525×4025×4525×50
2828×2828×30
3030×3030×3530×4030×4530×5030×60
3535×3535×4035×4535×5035×60
4040×40

Plate footprint, to scale in 500 × 700 mm

Pick a size to draw it

Diagram, 50 mm grid; thickness quoted on request.

FAC

Simplified three-plate

Plates
8
Sizes
41
Series
15 to 40

Similar in structure to three-plate Type DA: guide pins are installed downward from the top clamp plate, guide bushings are added in the support plate, and there are no guide pillars from the moving side: a simplified three-plate base.

Type DA mold base
Photo of Type DA, shared on the original site; the drawing shows how FAC differs.
Type FAC structure drawing
Structure drawing from the original site. Original FAC page

Material list

Type FAC material list
No.PartChinese nameMaterialQty
1Top clamp plate上固定板S50C1
2Runner stripper plate小點板S50C1
3Cavity plate (fixed side, A plate)母(固定側)板S50C1
4Core plate (moving side, B plate)公(可動側)板S50C1
5Support plate封(承)板S50C1
6Spacer block隔(墊腳)板S50C2
7Ejector retainer plate上頂出板S50C1
8Ejector plate下頂出板S50C1
9Bottom clamp plate下固定板S50C1
10Guide pin導梢SCM214
11Guide bushing (cavity side)導套(母模)SUJ24
12Guide bushing (core plate)導套(公板)SUJ24
13Guide bushing (support plate)導套(封板)SUJ24
14Runner-stripper-plate bushing小點板襯套SUJ24
15Return pin回位梢SCM214
16Socket head cap screw (bottom plate)內六角螺絲(下板)SCM4154
17Socket head cap screw (ejector plate)內六角螺絲(頂出板)SCM4154

Series and sizes offered

Rows are series (plate width, cm), columns are lengths (cm); only filled cells are offered. Click a cell to pick it.

Type FAC sizes
Series \ length1820232528303540455060
1515×1815×2015×2315×2515×3015×35
1818×2018×2318×25
2020×2020×2320×2520×2820×3020×3520×4020×45
2323×2323×2523×30
2525×2525×2825×3025×3525×4025×4525×50
2828×2828×30
3030×3030×3530×4030×4530×5030×60
3535×3535×4035×4535×5035×60
4040×40

Plate footprint, to scale in 500 × 700 mm

Pick a size to draw it

Diagram, 50 mm grid; thickness quoted on request.

GA

Simplified three-plate

Plates
7
Sizes
41
Series
15 to 40

Similar in structure to three-plate Type EA, with guide pins installed downward from the top clamp plate and no guide pillars from the moving side: the most simplified three-plate base.

Type EA mold base
Photo of Type EA, shared on the original site; the drawing shows how GA differs.
Type GA structure drawing
Structure drawing from the original site. Original GA page

Material list

Type GA material list
No.PartChinese nameMaterialQty
1Top clamp plate上固定板S50C1
2Cavity plate (fixed side, A plate)母(固定側)板S50C1
3Core plate (moving side, B plate)公(可動側)板S50C1
4Support plate封(承)板S50C1
5Spacer block隔(墊腳)板S50C2
6Ejector retainer plate上頂出板S50C1
7Ejector plate下頂出板S50C1
8Bottom clamp plate下固定板S50C1
9Guide pin導梢SCM214
10Guide bushing (cavity side)導套(母模)SUJ24
11Guide bushing (core plate)導套(公板)SUJ24
12Return pin回位梢SCM214
13Socket head cap screw (bottom plate)內六角螺絲(下板)SCM4154
14Socket head cap screw (ejector plate)內六角螺絲(頂出板)SCM4154

Series and sizes offered

Rows are series (plate width, cm), columns are lengths (cm); only filled cells are offered. Click a cell to pick it.

Type GA sizes
Series \ length1820232528303540455060
1515×1815×2015×2315×2515×3015×35
1818×2018×2318×25
2020×2020×2320×2520×2820×3020×3520×4020×45
2323×2323×2523×30
2525×2525×2825×3025×3525×4025×4525×50
2828×2828×30
3030×3030×3530×4030×4530×5030×60
3535×3535×4035×4535×5035×60
4040×40

Plate footprint, to scale in 500 × 700 mm

Pick a size to draw it

Diagram, 50 mm grid; thickness quoted on request.

GC

Simplified three-plate

Plates
6
Sizes
41
Series
15 to 40

Similar in structure to three-plate Type EC, with guide pins installed downward from the top clamp plate and no guide pillars from the moving side: the most simplified three-plate base.

Type EC mold base
Photo of Type EC, shared on the original site; the drawing shows how GC differs.
Type GC structure drawing
Structure drawing from the original site. Original GC page

Material list

Type GC material list
No.PartChinese nameMaterialQty
1Top clamp plate上固定板S50C1
2Cavity plate (fixed side, A plate)母(固定側)板S50C1
3Core plate (moving side, B plate)公(可動側)板S50C1
4Spacer block隔(墊腳)板S50C2
5Ejector retainer plate上頂出板S50C1
6Ejector plate下頂出板S50C1
7Bottom clamp plate下固定板S50C1
8Guide pin導梢SCM214
9Guide bushing (cavity side)導套(母模)SUJ24
10Guide bushing (core plate)導套(公板)SUJ24
11Return pin回位梢SCM214
12Socket head cap screw (bottom plate)內六角螺絲(下板)SCM4154
13Socket head cap screw (ejector plate)內六角螺絲(頂出板)SCM4154

Series and sizes offered

Rows are series (plate width, cm), columns are lengths (cm); only filled cells are offered. Click a cell to pick it.

Type GC sizes
Series \ length1820232528303540455060
1515×1815×2015×2315×2515×3015×35
1818×2018×2318×25
2020×2020×2320×2520×2820×3020×3520×4020×45
2323×2323×2523×30
2525×2525×2825×3025×3525×4025×4525×50
2828×2828×30
3030×3030×3530×4030×4530×5030×60
3535×3535×4035×4535×5035×60
4040×40

Plate footprint, to scale in 500 × 700 mm

Pick a size to draw it

Diagram, 50 mm grid; thickness quoted on request.

GAC

Simplified three-plate

Plates
7
Sizes
41
Series
15 to 40

Similar in structure to three-plate Type EA: guide pins installed downward from the top clamp plate, no guide pillars from the moving side, and guide bushings added in the support plate: the most simplified three-plate base.

Type EA mold base
Photo of Type EA, shared on the original site; the drawing shows how GAC differs.
Type GAC structure drawing
Structure drawing from the original site. Original GAC page

Material list

Type GAC material list
No.PartChinese nameMaterialQty
1Top clamp plate上固定板S50C1
2Cavity plate (fixed side, A plate)母(固定側)板S50C1
3Core plate (moving side, B plate)公(可動側)板S50C1
4Support plate封(承)板S50C1
5Spacer block隔(墊腳)板S50C2
6Ejector retainer plate上頂出板S50C1
7Ejector plate下頂出板S50C1
8Bottom clamp plate下固定板S50C1
9Guide pin導梢SCM214
10Guide bushing (cavity side)導套(母模)SUJ24
11Guide bushing (core plate)導套(公板)SUJ24
12Guide bushing (support plate)導套(封板)SUJ24
13Return pin回位梢SCM214
14Socket head cap screw (bottom plate)內六角螺絲(下板)SCM4154
15Socket head cap screw (ejector plate)內六角螺絲(頂出板)SCM4154

Series and sizes offered

Rows are series (plate width, cm), columns are lengths (cm); only filled cells are offered. Click a cell to pick it.

Type GAC sizes
Series \ length1820232528303540455060
1515×1815×2015×2315×2515×3015×35
1818×2018×2318×25
2020×2020×2320×2520×2820×3020×3520×4020×45
2323×2323×2523×30
2525×2525×2825×3025×3525×4025×4525×50
2828×2828×30
3030×3030×3530×4030×4530×5030×60
3535×3535×4035×4535×5035×60
4040×40

Plate footprint, to scale in 500 × 700 mm

Pick a size to draw it

Diagram, 50 mm grid; thickness quoted on request.

Custom mold bases

Two-color, multi-color, hot-runner, HASCO-type and other special bases; large bases up to 3 m long, 2 m wide, 1.8 m thick (TMDIA 2024).

In an era of high-mix, low-volume production and short product life cycles, a supplier must respond fast and be able to build very different orders. CHYAU MAW has long specialized in custom mold bases and has extensive machining experience for general and precision molds used in household goods, medical equipment, optoelectronics, 3C electronics, mobile-phone parts and automotive parts. Standard molds, two-color and multi-color molds, hot-runner molds and HASCO-type and other special mold bases are our core products. At the quotation stage our sales team learns each customer’s needs, helps identify likely problems and makes suggestions, and when necessary works with the customer to revise the mold design for an optimized mold.

Application categories on the original site

  • Automotive parts
  • Medical products
  • Machinery & hardware
  • Containers
  • Optics & electronics
  • Die-casting molds
  • Mold photo shown with the Automotive parts category on the original site
    Shown with “Automotive parts” on the original site
  • Mold photo shown with the Machinery & hardware category on the original site
    Shown with “Machinery & hardware” on the original site
  • Mold photo shown with the Optics & electronics category on the original site
    Shown with “Optics & electronics” on the original site

Attach your drawings to the email you send.

14 mold base components

Material, hardness and representative sizes come from the original spec sheets; full tolerance tables are in those sheets.

Guiding & alignment parts

Guiding & alignment

CodePartMaterialHardnessRepresentative sizes (mm)Spec sheet
GPGuide pin
導梢
SCM21HRC 60±2d 16, 20, 25, 30, 35, 40, 45, 50, 60Open
GBGuide bushing
導套
SUJ2HRC 58±2d 16, 20, 25, 30, 35, 40, 45, 50, 60Open
GSStraight bushing
襯套
SUJ2HRC 58±2d 16, 20, 25, 30, 35, 40, 45, 50, 60Open
LPSupport pin (tie rod)
拉桿
SCM21HRC 60±2d 16, 20, 25, 30, 35, 40; thread M8 to M16Open
EBEjector guide bushing
導襯套
SUJ2HRC 58±2d 16, 20, 25, 30Open
RPReturn pin
回位梢
SCM21HRC 60±2d 12, 16, 20, 25, 30Open
LSLocating ring
定位環
S50CD 60, 100, 120, 150 (T 15)Open
EGPEjector guide pin
引導梢
SCM21HRC 60±2d 16, 20, 25, 30Open
Stroke limiting parts

Stroke limiting

CodePartMaterialHardnessRepresentative sizes (mm)Spec sheet
PBPuller bolt (limit bolt)
限動桿
SCM21HRC 45±2d 12, 16, 20, 25; L 110 to 280
Order code PB d × L
Open
SBStop bolt
停止螺絲
SCM21HRC 45±2d 12, 16, 20, 25
Order code STB d × L
Open
SHShoulder screw
等高螺絲
SCM435HRC 40±2d 8, 10, 12, 16, 20, 25; thread M6 to M20Open
Support & handling parts

Support & handling

CodePartMaterialHardnessRepresentative sizes (mm)Spec sheet
LEEye bolt
吊環
Ask usNo spec sheet published; ask us
SPSupport pillar
支撐柱
S50CD 25, 30, 40, 50, 60, 80; L 60 to 120
Order code SP D × L
Open
STStop pin
停止梢
Ask usNo spec sheet published; ask us

Plastic mold steel, 6 families

Grades as listed on the original site; chemistry and hardness are not published, ask us.

Carbon steel

  • S50C
  • P1
  • SPM-1

Alloy steel

  • P3
  • HP4A
  • SPM-1
  • P5
  • P20
  • HP4MA
  • 2311
  • 2312
  • 2738
  • XPM
  • BPM-HH
  • BPM-HHH
  • P20M
  • Hi-P20
  • PX4
  • 2711
  • 2714

Hot-work tool steel

  • T29(2347)
  • 2347
  • FX-XTRA
  • 2344-38
  • FDAC
  • H13
  • 2344
  • SKD-61
  • H13(SKD61)
  • DC-XTRA

Cold-work tool steel

  • S7
  • SKD11

Mirror-polish steel

  • PCM40S
  • WP80
  • K88
  • NAK80

Stainless steel

  • K81H
  • K86(2316)
  • 2316
  • K84
  • 420
  • 2083-38
  • WP85
  • K89

P3, P5 and P20 became standard stock in 1999; the Wei Sheng steel department was set up in 2000.

CAD downloads

CHYAU MAW provides 2D and 3D files of its standard mold bases and components for free download in a few steps: 3D files as NX part files and neutral Parasolid (.x_t), plus 2D files and EDM files.

This is CHYAU MAW’s current official download page; this static preview does not serve files.

Go to the official download page